clements RI
Recruit
- Joined
- Jul 20, 2022
- Messages
- 4
I am tryining to replace the mech FP mounted on top of my water pump with an electric fuel pump. I understand the need for wiring to a pressure switch and a relay and think i have all the wiring info i need, but am not sure of a few things;
1. what would be a good recomended el FP, wht is min.\/max psi, min/max gpm
2. to wire to a oil pressure gage. (I S, P terminals) is there an exiting switch i can slave to or do i need to insall one. and can thisbe done on the water without draining oil?
Have some other quest but will wait to see if i get a relay - will welcome any input or points to similar threads- thanks
1. what would be a good recomended el FP, wht is min.\/max psi, min/max gpm
2. to wire to a oil pressure gage. (I S, P terminals) is there an exiting switch i can slave to or do i need to insall one. and can thisbe done on the water without draining oil?
Have some other quest but will wait to see if i get a relay - will welcome any input or points to similar threads- thanks