Re: Customers Lying. Why?
gotta agree with silvertip and some of the rest here.
most customers are rather boneheaded when it comes to the equipment.
dunno if its cause they are scared or what.
to many tell me its just a car motor.
most dont realize that this equipment is every bit a piece of high performance gear as any nascar racer.
you will note how many Nascar drivers let their cars sit out back all winter and then run on the same rubber parts and fuel as last year,or 5 years ago last time it was used.
this is why most engine/drive manufctures have a MAINT schedule for replacement/inspection at an hourly OR calander period.
I had a customer last year got towed in from 38 miles offshore in a 3 week old grady 33 with a pair of Z300 yamahas.
got back to the dock,mad as heck, yapping about BOTH yamahas blew up.
as I was standing on the fuel docks in prepertion for my ride home,asked him, crank them over.
they sounded normal cranking.
I jumped on board,switched his manual fuel valves from main to aux,primed both engines and lit them off.
guy ran out of gas standing on 165 gallons yet did not know he had manual fuel valves even though they are just below the battery switches and labeled in red.
good thing it was a calm day cause he had his wife,kids and the dog onboard.
this summer we had a guy towed in from about 20 miles,hit the dock and was instantly in the shop raising cain cause we had just recently serviced both motors and both would not start and he got towed and yadda yadda yadda.
service manger went down on the dock,moved both shifters to Nuetral,lit both off and laughed. for some reason the guy had shut them down in gear and forgot to move the handles back.
some folks may qualify to finance this stuff but have no business operating it with no training.
most wont pay my 85/hr billing rate for a days worth of training.
seems it would be cheap insurance when your operating a 200 thousand dollar+ boat. ya think?
kinda like they guy swearing it never got hot yet I am looking at coils melted into the cylinder head or paint burned off the head.
or they guy swearing no one but your shop has touched the motor yet there are chmpion plugs in his yamaha and we dont stock anything but NGK's.
enough rant
but in real life,just as posting, I can be sarchastic and sometimes acebric,however I will show anyone anything they ask when I am on their work order.
folks ask me all the time: do you think I can fix it? I tell them I am confident there is nothing they can tear up that I cant fix with cash
