bansheetaz
Cadet
- Joined
- Dec 1, 2005
- Messages
- 20
Re: failing power packs
on mine i disconnected that wire at the key switch and at the main harness plug at the engine and with the key off there is nothing but with the key on i have 50 mv which trickles down to about5 mv. i ohm checked that wire with the rest of them in the main cable and its not shorted to any other wire. i was wondering if its just voltage being induced by the other wires in the loom being so close. any thoughts?<br /><br />troy
on mine i disconnected that wire at the key switch and at the main harness plug at the engine and with the key off there is nothing but with the key on i have 50 mv which trickles down to about5 mv. i ohm checked that wire with the rest of them in the main cable and its not shorted to any other wire. i was wondering if its just voltage being induced by the other wires in the loom being so close. any thoughts?<br /><br />troy