Ficht leaks fuel.

[jerryjerry05]

Johnson 150 Ficht.
Not sure of the year???
# on the silver plug 4886732
As you(me) squeeze the bulb fuel squirts out the top cyl or hole for the top cyl. see pic by the #1 What's behind there that lets fuel out?
THANKS

When you run it runs but not as good as the second motor.

 

[oldboat1]

Not a clue, Jerry -- but #9 and #35 appear to be nozzles -- maybe part of the primer system(?) Could be normal.

 

[Faztbullet]

Lift pump checked for leakage?

 

[jerryjerry05]

Not a clue, Jerry -- but #9 and #35 appear to be nozzles -- maybe part of the primer system(?) Could be normal.

Not normal at all. The other motor doesn't leak????

 

[jerryjerry05]

Lift pump checked for leakage?

Was thinking this might be part as one motor, the ball pumps up while this one never gets hard.
Thanks

 

[oldboat1]

Ball obviously wouldn't get hard if fuel is blowing out as fast as you pump it.

 

[jerryjerry05]

Not the lift pump
Going to dig deeper next week.

 

[jerryjerry05]

It's a 2000 Evinrude 150
The vapor separator isn't like the rest of the world.
Just wondering if the injector could be leaking past??

 

[jerryjerry05]

Took the vapor separator apart and the needle is defective.
Has the soft rubber tip and it's screwed.
The bad: they don't sell separate parts for this thing only whole units.
The start at 350$ used if you have one or the needle/seat and cap laying around send me a PM.