FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
Can't come up with the right search words. '85 Force 125. Need to lift it. Saw an eyebolt that screws on the flywheel somewhere on iboats. Directions please/thanks
Yeah, you can buy one, but you can also make a plate about 3/16 to 1/4 inch thick with three holes to match the three holes in the top of the flywheel. Three 1/4 X 20 bolts screw in.
Drill a hole in the center and screw in an eyebolt about 1/2 inch shank size you buy at Home-Depot.
Yeah, you can buy one, but you can also make a plate about 3/16 to 1/4 inch thick with three holes to match the three holes in the top of the flywheel. Three 1/4 X 20 bolts screw in.
Drill a hole in the center and screw in an eyebolt about 1/2 inch shank size you buy at Home-Depot.
Thanks, I think. $4 at home depot and it's hanging. Worked like a charm. Now I can see some real ugly that was out of sight/ out of mind. Some degreasing and it's off to RRitt. Thanks again
