This is a 1982 Evinrude 7.5 Just finished rebuild with new Pistons, Rings, bearings and Seals. I have the engine up on a stand with the lower half in a Trash can of water. The engine starts on first or second pull, runs smooth. However, I have not run the engine for more than one or two minutes because I am going to replace the impeller in the foot. (previous post) <br />What is bothering me is - I have noted that the flywheel has a little play in it. Which is to say that before I start the engine, I can place my hand on the top of the flywheel on rotate it back and forth about an inch or so. Any thoughts????<br />Thanks for your help...
