I have a 2003 150 Johnson that I'm fighting with a idle speed and cruise speed fluctuation after taking it to dealer for service. It was brought for service because the engine would kill when engaging reverse from idle; only reverse not foward.<br /><br />Well, I took it to the dealer who simply advanced the idle timing to maximum limit stop. The OB now idles at 1000 rpm and does not kill when engaging reverse. However, I now have two other problems not experienced before the service:<br />1.) The reverse and foward gears engage with a bang and jerk.<br />2.) After running at high rpm and then slowing down to an idle then in neutral, the rpm will initially run at the 1000 rpm then will slowly decrease over about 60-90 seconds to about 550 rpm at which point the OB kills. It will not restart until I pump the primer bulb.<br />point.<br /><br />PLEAS HELP!