TitusAdronicus
Cadet
- Joined
- Mar 26, 2007
- Messages
- 19
Hey all, im trying to get by brother in law's boat in the water, everything works fine, except i noticed a small perfectly round hole about 4 inches in front of the water inlet on the starboard side of the lower unit. its a little smaller than 1/8" and water drips out of it when on the muffs, is this an intentional hole or do i have a problem?
also the exhause bellows that connects to the drive has a bunh of holes in it on the bottom, it looks like it could have been made that way, but i think it has been rubbing when the drive it tilted up and down and may have worn through on each rib. Is this a problem? i mean the water and exhaust get to the same place either way right?
THanks!
also the exhause bellows that connects to the drive has a bunh of holes in it on the bottom, it looks like it could have been made that way, but i think it has been rubbing when the drive it tilted up and down and may have worn through on each rib. Is this a problem? i mean the water and exhaust get to the same place either way right?
THanks!