how to change oil on a 125hp 1989 force

[dmas]

Hi everybody

I was wondering if to change the oil I have to fill it from the bottom screw or can I use the top screw that says "fill" next to the "vent" screw, because I've read on lot of treads that you should change your oil using a pump thru the lower screw...

 

[joshdashnaw]

Re: how to change oil on a 125hp 1989 force

Feeling it from the bottom up insures that there is no air bubbles in there. The pumps are cheap to purchase.

 

[dmas]

Re: how to change oil on a 125hp 1989 force

thanks seaman, also got an idea where can I find the water pump housing? mine is plastic, part of the plastic tube broke down when trying to install the lower unit back into place, you think I can glue it back in?

 

[joshdashnaw]

Re: how to change oil on a 125hp 1989 force

I'm not sure about that, but I wouldn't glue it. I'd replace whatever broke. Probably needs replacing anyways if it is breaking easily. Good idea to replace impeller why you have LU off if you haven't done that.

 

[dmas]

Re: how to change oil on a 125hp 1989 force

you are right, it's better to replace the plastic housing, found one on ebay used for $30, I will replace seals and impeller also, thanks for your help..