Is there a trick to removing the plastic fitting the back drag tube is connected to the carb with?
D deerhuntre Petty Officer 2nd Class Joined Apr 26, 2007 Messages 186 May 15, 2007 #1 Is there a trick to removing the plastic fitting the back drag tube is connected to the carb with?
Clams Canino Commander Joined Jan 10, 2004 Messages 2,179 May 15, 2007 #2 Re: How to remove back drag tube for carb rebuild? What carb? What model outboard? What approximate year? You gotta put the model in the header of the post if you expect it to get read at all , let alone answered. -W
Re: How to remove back drag tube for carb rebuild? What carb? What model outboard? What approximate year? You gotta put the model in the header of the post if you expect it to get read at all , let alone answered. -W
D deerhuntre Petty Officer 2nd Class Joined Apr 26, 2007 Messages 186 May 16, 2007 #3 Re: How to remove back drag tube for carb rebuild? Sorry. 1986 Merc inline 6 115. Side float back draft carb. Is there more info that is helpful?
Re: How to remove back drag tube for carb rebuild? Sorry. 1986 Merc inline 6 115. Side float back draft carb. Is there more info that is helpful?
Clams Canino Commander Joined Jan 10, 2004 Messages 2,179 May 16, 2007 #4 Re: How to remove back drag tube for carb rebuild? All you need to remove to properly clean those carbs is the rubber tube, the main jet cover, the float bowl cover and the idle needle. Every possible passage can be sprayed with just those removed. -W
Re: How to remove back drag tube for carb rebuild? All you need to remove to properly clean those carbs is the rubber tube, the main jet cover, the float bowl cover and the idle needle. Every possible passage can be sprayed with just those removed. -W
