How to remove seawater pump on aq271c?

[LadyAnya]

I noticed a small leak at the seawater pump today and decided to check it out. I was able to remove the impeller and housing from the crank pulley, however I can't seem to separate the impeller housing from the part that bolts to the crank pulley. How do I separate the two?

 

[zbnutcase]

Re: How to remove seawater pump on aq271c?

You dont, you remove the three allen head bolts to remove pump, and some of those pumps are toss-aways, no repair parts available.

 

[LadyAnya]

Re: How to remove seawater pump on aq271c?

I was able to separate the two parts. Does anyone know were to get a rebuild/repair kit?

 

[Bondo]

Re: How to remove seawater pump on aq271c?

I was able to separate the two parts. Does anyone know were to get a rebuild/repair kit?

You dont, you remove the three allen head bolts to remove pump, and some of those pumps are toss-aways, no repair parts available.

Ayuh,... Sounds like ya Don't..... ZB is rarely wrong on this stuff...

 

[captmello]

Re: How to remove seawater pump on aq271c?

Here is a parts breakdown. I do not know if it can be fixed or not.

http://www.volvopentastore.com/Sea-Water-Pump-855722/dm/*******.905361148--**********.143317069--store_id.366--view_id.329456

 

[Don S]

Re: How to remove seawater pump on aq271c?

Check with NAPA, they used to have the Jabsco replacement pump, brand new for just over a 100 bucks.
The pump housing where the impeller makes contact is probably wavy and worn out as well being 20 some years old.