I/O (Sterndrive) Conversion to Outboards

Pmt133

Lieutenant Commander
Joined
Jan 6, 2022
Messages
1,625
Is it just an optical illusion or does the extension have a slight hook to it?

And you don't see that side anyway! Looks good
 

tpenfield

Moderator
Staff member
Joined
Jul 18, 2011
Messages
19,180
Is it just an optical illusion or does the extension have a slight hook to it?

And you don't see that side anyway! Looks good
I thought that it might have a slight downward angle to it. Maybe an 1/8" of an inch . . . But I have not put a straight edge on it to check.

If it does, it will be deemed a feature (stern lift) rather than a defect. :ROFLMAO:
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
44,115
Looks good, and after the bottom paint goes on and motors installed, folks will be looking at the motors
 

aspeck

Moderator
Staff member
Joined
May 29, 2003
Messages
19,758
Ted, from Central PA it looks great! And remember, the imperfections that you see will never be seen by a blind man riding a horse in the middle of the night, so all is good!
 

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
52,565
Ted, if it really bothers you, scuff the extension, mix up some gel paste, and spot fill the low points with a putty spreader. Then hit the extension with 330 grit, then 400, then 600 then 800. Then polish

Most of the imperfections should disappear
 
Top