glennj3
Petty Officer 1st Class
- Joined
- Sep 6, 2011
- Messages
- 381
After spending a lot of money, lots of time working on my own boat, progress just sucks!
So now I got more tools in, checked the inch lbs on my ujoint bearing. I can not tighten it enough to go over 2.2 inch lbs. I checked the torque reading at this point and it reads 80 ft lbs.
I can still turn the bearings by hand but they are a little stiff. I take them off, oil them all and turn them, repeat the steps, I can not get over 2.2 inch lbs with the me holding the outside of the bearings.
What is wrong, besides I need to do something else!
So now I got more tools in, checked the inch lbs on my ujoint bearing. I can not tighten it enough to go over 2.2 inch lbs. I checked the torque reading at this point and it reads 80 ft lbs.
I can still turn the bearings by hand but they are a little stiff. I take them off, oil them all and turn them, repeat the steps, I can not get over 2.2 inch lbs with the me holding the outside of the bearings.
What is wrong, besides I need to do something else!