Just to make sure in my mind I'm about to do this right here is my plan. First all the wood is out. Second, grind all the excess glass off the sides. Third clean up the mess, fourth cut patterns out of cardboard for the deck and cabin, 5Th, cut my wood and dry fit it, 6Th lay it out and use epoxy resin and put one coat on bottom and edges, 7, use liquid nail on the stringers and place wood in, 8 use filler to fill in the edges and the seams then tape them, 9 put on layer of epoxy resin on deck, lay in the cloth, put another coat over cloth and take a roller and get all the bubbles out, sand, clean up and done. Am I close? And thanks to everyone for advice and reading all my questions.
