Johnson 90 shift and throttle retainer

[wired247]

Ive got a 1981 Johnson 90 on my Checkmate Enticer. I'm in the process of rebuilding the boat and Ive run into a small snag . The motor seems to be missing the cable retainer or retainers where the cables come into the motor housing. The original owner ( dad ) seems to have lost it and the cables are held in place with a couple of fender washers and 1/4" bolts. I'm assuming thats not how they are supposed to be retained. Does anyone have a pic of what the cable retainer looks like or is supposed to look like or better yet the OMC part numbers?

Thanks

 

[emdsapmgr]

Re: Johnson 90 shift and throttle retainer

You can check out the original factory exploded parts diagram from the Bombardier website: epc.brp.com.

 

[wired247]

Re: Johnson 90 shift and throttle retainer

That section does not have an exploded diagram or parts list.

 

[emdsapmgr]

Re: Johnson 90 shift and throttle retainer

Not sure why you can't get into the Bombardier webiste. Usually works fine. The parts you may need may be a metal clamp retainer, part number 323400. Bombardier has made that part a special order-they don't stock it, but you can order it. There are a few dealers around the US which still have new stock on that part. One of them is: VANS SPORT CENTER INC, 1855 ALPINE AVE NW, GRAND RAPIDS, MI., 49504-2872 Phone: (616) 364-0666. Also you would neerd the retainer screw: part number 323429 which supercedes to 328724 and is still in stock at Bombardier.