Kill Switch

[kelly t]

I have a 1981 evinrude 115TLC1M in perfect condition. My question is what kind of killswitch should I install and how easy/hard is it to install.
All help is greatly appreicated.

thanks
Kelly

 

[Barnacle_Bill]

Re: Kill Switch

They are pretty easy to install. One side gets wired to the black/yellow wire and the other side goes to ground. http://www.iboats.com/Seachoice_Kill_Switch/dm/*******.082062066--**********.200239493--view_id.4579

 

[Bondo]

Re: Kill Switch

Ayuh,...

Have you got that motor mounted on a boat,..??
Is there a controller, with a Key to start it,..??
Are you mounting the killswitch on the Motor,..?? or the Controller,..??

 

[kelly t]

Re: Kill Switch

is mounted on a 17 ft Ebbtide and does have a control and key start.
Would be mounting on the controller

 

[fdmsiv]

Re: Kill Switch

If you get a metal push kill switch make sure you get the push=close otherwise you will get a nasty shock and your engine will not stop (don't ask me how I know this, just know the packaging is very similar for the switches)