Looking for alignment tools

[Jeepman252]

4.3 with Alpha 1, Gen 1

Ok, I have an 89 Sea Ray that the motor decided to spin a main bearing and crack the block.

Instead of finding another motor, I found an 89 Larson with the same motor/outdrive that I will use as a donor.

I need the alignment tools for this. Not sure which ones I need.

Will need this pretty soon as I will be starting this project within a month. Gotta wait until a bit of this Wisconsin snow melts and the temps get a bit warmer as this will be an outside project!

Thanks!

 

[alldodge]

Search Mercruiser alignment tool, many sell them. They work on Merc, VP and OMC

Dimensions of tool

 

[Jeepman252]

Search Mercruiser alignment tool, many sell them. They work on Merc, VP and OMC

Dimensions of tool

Thanks,
Is that the only tool I need? I'll be swapping the entire deal, engine to the prop.

 

[matt167]

Thanks,
Is that the only tool I need? I'll be swapping the entire deal, engine to the prop.

Yes. You won’t need the transom assembly unless it’s in better shape since they are the same. But it would give you a good idea of transom condition if you do

 

[Jeepman252]

Yes. You won’t need the transom assembly unless it’s in better shape since they are the same. But it would give you a good idea of transom condition if you do

I will be swapping the transom assembly too, the donor is in better shape.
So, with that, any additional tools?

 

[Bondo]

Ayuh,..... No special tools, just the usual mechanic's tools,.......

 

[Jeepman252]

Ayuh,..... No special tools, just the usual mechanic's tools,.......

Sweet! Thanks!