Mariner 40HP

[fstorm08]

Re: Mariner 40HP

I believe I have it figured out.

Looks like the exhaust bucket is missing as well a some seals. :redface:

I'm going to need to drop the midsection and see what is missing.

This is becoming quite the puzzle

 

[fstorm08]

Re: Mariner 40HP

Or possible like this:

Either way, I will need to open it up to get a better look at it.

 

[fstorm08]

Re: Mariner 40HP

Pulled the powerhead off tonight.

Going to see what the scoop is what the water/exhaust in the driveshaft housing that is coming out at the mounts.

 

[fstorm08]

Re: Mariner 40HP

Does anyone know if water/exhaust should be inside the red area?

The circled areas all lead to the center water/exhaust jacket (arrow):

And then out the exhaust port on the driveshaft housing of the motor:

When I took the exhaust tube out, seal number 12 was missing:

Thank you in advance for any assistance.

 

[fstorm08]

Re: Mariner 40HP

I ordered some gaskets and the seal that was missing. Once I get these, I'll start getting her back together.

Hopefully the missing seal is the reason there was water and exhaust coming out of the top mounts.

 

[fstorm08]

Re: Mariner 40HP

Finally got some of the parts needed on order.

Ended up ordering from 3 different places

 

[fstorm08]

Re: Mariner 40HP

Well I should be getting the last of the seals and gaskets today.

I'm going to fix the 8 busted/correded bolts and start getting it put back together and run it. :facepalm:

There is so much damn corrosion on everything that it's getting to the point it's not work the headache and I still need to get a prop for it.

It would be easier to just tear it down and part it out.

 

[fstorm08]

Re: Mariner 40HP

Working on getting the reverse lock working on my 1984 Mariner 40C twin carb, 2 cyl.

Can someone take a pic of their's and post it for me? Trying to figure this thing out :redface:

I have it taken apart for de-rusting :facepalm:

Thank you

 

[fstorm08]

Re: Mariner 40HP

Does anyone know where a PDF version of this manual could be purchased and downloaded on the web?

Thanks again

 

[fstorm08]

Re: Mariner 40HP

Working on getting the reverse lock working on my 1984 Mariner 40C twin carb, 2 cyl.

Can someone take a pic of their's and post it for me? Trying to figure this thing out :redface:

I have it taken apart for de-rusting :facepalm:

Thank you

I got it figured out. the 2 really rusted hook type pieces at the bottom are supposed to be one larger piece :facepalm: