Merc 250 Verado Fuel increase

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
43,850
The starboard motor has the higher psi and FMS was replaced more than a year ago. Starboard is doing fine other than the low voltage alarm which is another issue

Both cowls have paint along with stern of boat. Will take more pics but on my way to sisters in KC MO, will ne back late Tuesday
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
43,850
I'm at my sister's in KC until late Tuesday, appreciate communication and will respond after that
 

muc

"Retired" Association of Marine Technicians...
Joined
Jul 7, 2004
Messages
2,307
Something that popped into my head, it doesn't fit with the vibration you experienced. But might be something that could effect the unequal fuel burn.
Your engines have software called ARO --- advanced range optimization.
This will adjust fuel and spark when certain parameters are meet.
When this is operational it won't be felt by the operator or show on the Smart Craft screen, It's only visible with a scan tool.
Next time your at your boat, maybe connect the Tech Mate and look for something along the lines of "lean burn control state".
Maybe one engine is going into ARO and the other isn't?
 

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
43,850
Well I messed up a bit, searching for NGK LKAR7C-9 which is part number 93961 I would up with LKAR7C-8 and doesn't list NGK

Looking at plugs it list -9 has 9mm gap (0.035) and -8 has 8mm Gap (0.031)

Going to contact amazon and get a refund
 
Top