Merc 9.8hp rope/flywheel problem

BDub

Cadet
Joined
Jul 28, 2002
Messages
22
I was at the lake yesterday to run the boat because i havent had it out in 3-4wks. I have been having trouble with the pullrope, it would pull out, but it wouldnt 'catch' and turn the motor over. after pulling it 5-6 times, it would finally catch and work for a while. yesterday, it worked, and the motor ran great until, i slowed to let a boat pass so i could turn around, and while idling along, the engine just died. <br /><br />now the rope will not pull out, its like its locked up. I didnt hit anything, and water was shooting out from the engine just minutes before, because i keep my eye on that kinda thing. <br /><br />the gas is the same gas i used 3-4 weeks ago, i didnt add gas or oil or anything to it. it was shaken before use as well. <br /><br />any ideas what the problem is? please tell me that the motor isnt locked up and non-fixable. this has been a great engine. I'm hoping it has something to do with the pullrope troubles i have been having already.
 

Chinewalker

Fleet Admiral
Joined
Aug 19, 2001
Messages
8,902
Re: Merc 9.8hp rope/flywheel problem

Pull the hood off and try turning the flywheel by hand - this will tell you whether it's a recoil problem or a motor problem....<br />- Scott
 

BDub

Cadet
Joined
Jul 28, 2002
Messages
22
Re: Merc 9.8hp rope/flywheel problem

i havent tried turning the flywheel by hand yet, but i will soon. If it does indeed turn by hand, does that mean the pullrope mechanism is the problem, and if it doesnt turn by hand, im guessing that the engine is shot? <br /><br />Thanks for the quick response though, and i'll keep you guys informed.
 
Top