Please note that the PICTURE UPLOAD function is not working. The iBoats Forum Moderators are working with the system administration folks at the parent company to get the issue resolved. This happened about a year ago and here we are again. In the meantime you can post photos as links to a picture hosting site of your choice. We are sorry about the inconvenience and will advise when the issue is resolved. Thank you for your patience.
If it is 6 cyl. you have a band which goes around engine and a front cover. The front cover has a teardrop shaped knob near the bottom. Turn this and lift cover off. You should be see some toggle clamps. Release them and band should swing apart and come off.
I gave you inst for 110. Your engine should have a lever on the rear which you push down then you lift up on cover and lift off. You should see a rubber seal going around engine...this is where cover separates.
need help...i have a 115 hp 6 cyclinder mercury...have trouble when putting the throttle in forward or backward...it stalls out....does not stall if i push throttle forward or backwards far enough to keep from stalling...when in the slip and docking i need it to not stall and yet go slow enough...changed out spark plugs...is there something i'm missing??? i know it is probaly something small...
Actually it's probably a sign it's getting tired.<br /><br />If the idle and idle needles are set correctly, it out not do that. Try turning the idle up a little and re-doing the needles.<br /><br />-W
