FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
If it is 6 cyl. you have a band which goes around engine and a front cover. The front cover has a teardrop shaped knob near the bottom. Turn this and lift cover off. You should be see some toggle clamps. Release them and band should swing apart and come off.
I gave you inst for 110. Your engine should have a lever on the rear which you push down then you lift up on cover and lift off. You should see a rubber seal going around engine...this is where cover separates.
need help...i have a 115 hp 6 cyclinder mercury...have trouble when putting the throttle in forward or backward...it stalls out....does not stall if i push throttle forward or backwards far enough to keep from stalling...when in the slip and docking i need it to not stall and yet go slow enough...changed out spark plugs...is there something i'm missing??? i know it is probaly something small...
Actually it's probably a sign it's getting tired.<br /><br />If the idle and idle needles are set correctly, it out not do that. Try turning the idle up a little and re-doing the needles.<br /><br />-W
