FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
This is a side question. I had a 120hp Force. I took the temp sender off and put it on a 150hp Mercury. Is this ok. Will I get an alarm at the expencted temp?
I replaced both switch boxes and I still have the problem. Can’t get full power. Seems like 3 of the cylinders get a weaker spark especially when I throttle. I assume it can only be the trigger or stator.
So I bought a new trigger and put it on. Took it out and began accelerating. Got it up to 30mph for the first time. Never got it up to that speed before. Thought I fixed the problem with the new trigger. Ran for about 10mins then bogged down again. Couldn’t get it to go faster than 7mph after again. What could be the problem now? FYI I put 2 new switch boxes on it. Also the spark is weak on half the cylinders.
