New to towing

Joined
Jul 19, 2009
Messages
22
Hey guys, I have a trailer that needs all new lights. Where can I find the BEST deal on trailer lights? Theres 4 total lights on back and 2 side markers about half way up the trailer. Is there any kind of diagram to rewire these trailers or should i just pull out old wiring in tact and follow that?

Thanks
 

redone4x4

Lieutenant Commander
Joined
Feb 28, 2009
Messages
1,548
Re: New to towing

Northern tool has LED low profile lights on clearance right now for $20!!!!! I just saw it today. they usually come with the diagram, mine did. Heres what mine look like, they are the low-pro LEDs. they are much, much brighter than the pic shows:

DFpics013.jpg
 

SeanT

Senior Chief Petty Officer
Joined
Jul 8, 2009
Messages
661
Re: New to towing

Redone - those are HAWT.
 

Splat

Lieutenant
Joined
Jul 20, 2008
Messages
1,366
Re: New to towing

Hey one thing tho.

With the old wiring, cut the plug off the front of the trailer. then tape the new wiring to it. You can then use the old wiring to fish the new wiring through the trailer frames(if closed) by pulling the old wire through the back of the trailer.

Bill
 

redone4x4

Lieutenant Commander
Joined
Feb 28, 2009
Messages
1,548
Re: New to towing

Hey one thing tho.

With the old wiring, cut the plug off the front of the trailer. then tape the new wiring to it. You can then use the old wiring to fish the new wiring through the trailer frames(if closed) by pulling the old wire through the back of the trailer.

Bill

yes, thats how i did it. I also added 2 amber fender marker lights to mine, about 8 bucks a piece.
 
Top