Re: new trigger already wrecked ??!
no one has these motors anymore so i cant get much help,
I can't even remmber what motor you have. Be nice if you would post that.
It turns out the coil wasnt the problem, althoughi think its a part of it. i changed it up so it ran again with another working pack and still nothing. back to square 1. the damn trigger is probably toast.
FBR is not the way to trouble shoot a problem. (field block replacement) In some case's it makes it harder to actually find the true problem. People have asked you several questions about symptoms, like the compression readings, your answer......."there all good". IF you want help, then be helpfull, don't dish the people here trying to help you out.
Now motors all come down to these things. all happening in the correct sequence. Air/Fuel, Compression, and Spark . If anyone is missing, or out of time, or sequence, it won't run right.
When you say you switched # 3 with # 2, did you mean the plug wires? IF you did, then of course it won't run right. the fireing sequence is off. What that would show you, I have no clue. IF you know the carbs are good, the compression is good, the fuel pumps are good, then its time to look at the delivery of spark. Have you checked the timing? Have you tested the stator?
If its getting spark, then most likely the coil packs are fine. Oh did you test for spark, ie spark gap tool, or take all the plugs out, and ground them, and crank it, to check for spark at the very least?
Last but not least, most people here type full words, your jibbsh, mks it hrd to rd. Nt t mnt hrd to udstnd
