Nissan 18hp Water Pumping Issues?

tohatsu9.9guy

Seaman Apprentice
Joined
Jul 30, 2009
Messages
44
I have 18hp Nissan that I just did a powerhead swap on. Model is NS18C2. The motor was originally a 9.9hp NS9.9B2, but I swapped powerheads. The motor pumps water good, but I am curious if water is coming out of everywhere on the motor that it is supposed to. There is a place with two holes about half way down the leg (see pic, as I do not know the name of this) where I thought water was supposed to come out of. I may be wrong.. If water is supposed to come from here, then what could be the cause of the lack of water, and how should I fix it? Also, how do you check/ set timing on these motors? It should be close, but I'm paranoid that I may have thrown it a little off during the swap, as I had to mess with a linkage or two. I'm posting a youtube link to a video of the motor running. Thanks. -Matt

Video of the motor running: http://www.youtube.com/watch?v=my7iTzI68Us
 

Attachments

  • nissan 18 2.jpg
    nissan 18 2.jpg
    144.8 KB · Views: 0

Sea Rider

Supreme Mariner
Joined
Sep 20, 2008
Messages
12,345
Re: Nissan 18hp Water Pumping Issues?

Seems ok, when runing on muffs water comes out from different places, as long as you see water outing through peeing hole, mufler exhaust hole and through prop, nothing to worry. If engine runs great, dont mess with timming...

Happy Boating
 

pvanv

Admiral
Joined
Apr 20, 2008
Messages
6,569
Re: Nissan 18hp Water Pumping Issues?

For full info on how to set the link and sync, grab your copy of the Factory service manual (available from any dealer, including me), and follow the pictured steps. That will allow you to both set the carb for proper operation, and have the correct magneto advance.
 

tohatsu9.9guy

Seaman Apprentice
Joined
Jul 30, 2009
Messages
44
Re: Nissan 18hp Water Pumping Issues?

For full info on how to set the link and sync, grab your copy of the Factory service manual (available from any dealer, including me), and follow the pictured steps. That will allow you to both set the carb for proper operation, and have the correct magneto advance.

I have a manual for it. So as long as its got water coming through the prop hub I'm ok? What are the holes in the leg I circled in red for?
 

pvanv

Admiral
Joined
Apr 20, 2008
Messages
6,569
Re: Nissan 18hp Water Pumping Issues?

Those are drains.
 
Top