No Tell Tale after running into sand

allenjackson

Recruit
Joined
May 24, 2009
Messages
5
Ran in to a sand bar today with my 1990 Mercury 90hp...got home and hooked up the mickey mouse ears and tried flushing and to see a few drops of water coming from the tell tale. Looking for some help on this one. Hoping to clear this up on my own. Thanks.
 

allenjackson

Recruit
Joined
May 24, 2009
Messages
5
Re: No Tell Tale after running into sand

I know it's late...read some other sand adventures and went out and removed the tell tale hose and found it full of sand. Cleaned it out and in the morning I will hook up the water and make sure the impeller is still good.
 

sschefer

Rear Admiral
Joined
Nov 13, 2008
Messages
4,530
Re: No Tell Tale after running into sand

I know it's late...read some other sand adventures and went out and removed the tell tale hose and found it full of sand. Cleaned it out and in the morning I will hook up the water and make sure the impeller is still good.

If you sucked up enough sand through the impeller to plug the tell tale then I think pulling the L/U and rebuilding the water pump is in order. It's only 40.00 bucks and an hour of your time.
 

allenjackson

Recruit
Joined
May 24, 2009
Messages
5
Re: No Tell Tale after running into sand

Thanks. Happy Memorial Day. Thanks for serving. I will need to get the manual on the 90hp Mercury engine so I don't mess anything else up. :)
 
Top