pete44
Petty Officer 2nd Class
- Joined
- May 7, 2005
- Messages
- 189
Hello again...have 87 3.0litre with an Alpha1 drive...I replaced empeller/pump and now have oil seeping out bottom of drives "weep hole"..where water usually flows out...What seals are bad/not installed properly to cause this?...Also, Can I perform a "pressure test" myself to determine where leak is after I pull bottom leg of drive back off..And lastly,before this happened I ran on muffs and even before I cranked my engine water was flowing out "weep hole" with water on muffs...Is this normal?..(I guess this boat will never see water this summer)...Thanks,Pete