Oil fill plug 1978 Evinrude 115

[Royglastron]

This is a used boat I bought. Am I missing something on my fill plug. Should I have a screw cap on top or could it have broken off. Not finding any help on the net. My drain plug looks fine.
Thanks Roy

 

[boobie]

Re: Oil fill plug 1978 Evinrude 115

Are you talking about the allen head screw in the water pick-ups ?? If you are that holds the pinion brg in the g/c in place. The fill screw is on the bottom of the l/u. The one in the last pic is the vent screw for filling the l/u. The fill screw looks the same.

 

[Royglastron]

Re: Oil fill plug 1978 Evinrude 115

Are you talking about the allen head screw in the water pick-ups ?? If you are that holds the pinion brg in the g/c in place. The fill screw is on the bottom of the l/u. The one in the last pic is the vent screw for filling the l/u. The fill screw looks the same.

Thanks, was kind of hidden but now have found the fill screw and does look the same. Sorry but I am just learning about boat motors. Looking for a manual right now for my model. 1978 Evinrude 115hp


Thanks again, Roy

 

[boobie]

Re: Oil fill plug 1978 Evinrude 115

Get the OEM Factory Service Manual. Clymer and Seloc Suck.