OUTDRIVE

[GARRETTSUNSEEKER]

HOW TO REMOVE A VOLVO PENTA DPX
OUTDRIVE

 

[dubs283]

No need to yell

Remove rear cover, remove shift linkage pin, trunking and jam nut. Remove hinge pin(s). Remove six mounting nuts. Remove drive. Have a stand or helper ready to aid, drive is heavy and awkward

 

[GARRETTSUNSEEKER]

No need to yell

Remove rear cover, remove shift linkage pin, trunking and jam nut. Remove hinge pin(s). Remove six mounting nuts. Remove drive. Have a stand or helper ready to aid, drive is heavy and awkward

Thank you very much, The big question is I need to replace trim cylinders because I could not get the gland nut off for the life of me. So once I remove the drive is that easily accomplished.
Do you suggest an entire replacement of both pistons or just as needed?

And...

is there a schematic you can share so I know where to find the above mentioned items. This is my first removal.

Thank you so much again!

Garrett

 

[SavinRaven]

Garett get the shop manual to help you also watch a few youtube videos.