In my last post I had raised the motor one more hole and put the ventalation plate 1 & 1/2 " above the bottom.Heres the specs:<br />1972 Glastron Carlson CV 16, 72 100 HP Johnnie 13x21 Raker<br />Ran it today and got the following results:<br />WOT Trimmed out 5500 rpms<br />Speedo read alittle over 54 mph GPS bounced between 49.5 & 50 mph.<br />Temp read normal just like it always has<br />Boat was very stable.. chinewalking is gone<br />Holeshot is good enough I don't think I will drill the prop.<br />This was with me and my wife and a cooler of drinks, about the way the boat will be loaded most of the time.<br />Any thoughts or suggestions?<br /><br />Russ In Texas