Prop Shaft Spins But Propeller Does Not

[Boating.Bubba]

This is a follow up to this post.
I fixed the issue with a removal of the outdrive and have reinstalled it. It shifts fine and the propeller shaft spins. But with the propeller installed there is no movement. Would this be a spun hub?

 

[Bt Doctur]

If you have the rubber hub ,its doubtful you can spin the prop. If you have the Flo-Torq hub that is plastic you would see if it was broken apart with the prop removed?

 

[Boating.Bubba]

If you have the rubber hub ,its doubtful you can spin the prop. If you have the Flo-Torq hub that is plastic you would see if it was broken apart with the prop removed?

I took it apart. I have the flo-torq hub and it looks fine; no cracks or visible wear. I am truly perplexed.

 

[Boating.Bubba]

Here are some pictures.

 

[alldodge]

Reading your first thread I would think about disassembly of the lower. There is something wrong it the shift area.

Update. Seems that the clutch engages when the lower unit is laid down.

 

[Boating.Bubba]

Reading your first thread I would think about disassembly of the lower. There is something wrong it the shift area.

I've considered it but at this point I'm just looking for a new/used outdrive. I'll refurbish the old one over the winter and sell her. If anyone wants a 1.81 ratio alpha one gen II let me know in about three months.