9.5 johnson. What did I do and how do I undo it. I had forward before I tore it apart.
J jerad_s Cadet Joined Jul 17, 2008 Messages 19 Sep 20, 2010 #1 9.5 johnson. What did I do and how do I undo it. I had forward before I tore it apart.
D Daviet Fleet Admiral Joined Sep 24, 2008 Messages 8,958 Sep 20, 2010 #2 Re: Put new seals in the water pump, now no forward gear Do you have the connector for the shift shaft installed properly, the bolt through the notch in the shift shaft?
Re: Put new seals in the water pump, now no forward gear Do you have the connector for the shift shaft installed properly, the bolt through the notch in the shift shaft?
J jerad_s Cadet Joined Jul 17, 2008 Messages 19 Sep 21, 2010 #3 Re: Put new seals in the water pump, now no forward gear yup, im thinking there must be a gear that the LU and the shift lever on the motor must be in when you connect them. For example, the LU in reverse and the powerhead in reverse also.
Re: Put new seals in the water pump, now no forward gear yup, im thinking there must be a gear that the LU and the shift lever on the motor must be in when you connect them. For example, the LU in reverse and the powerhead in reverse also.
J jerad_s Cadet Joined Jul 17, 2008 Messages 19 Sep 21, 2010 #4 Re: Put new seals in the water pump, now no forward gear bump this back to the top
D Daviet Fleet Admiral Joined Sep 24, 2008 Messages 8,958 Sep 21, 2010 #5 Re: Put new seals in the water pump, now no forward gear If you have the connector installed properly the linkage will be in the proper gear.
Re: Put new seals in the water pump, now no forward gear If you have the connector installed properly the linkage will be in the proper gear.
J jerad_s Cadet Joined Jul 17, 2008 Messages 19 Sep 21, 2010 #6 Re: Put new seals in the water pump, now no forward gear bingo, I didnt have it far enough up. I realized the notch has to be in place for the screw to fit in.
Re: Put new seals in the water pump, now no forward gear bingo, I didnt have it far enough up. I realized the notch has to be in place for the screw to fit in.
