Re: Rebuilt carb, now wont start...
Well after a long delay I started to try to rebuild the carb, as I pulled it off the engine, I saw the manifold gasket was backwards. I guess I put it on the manifold first instead of the carb. Dumb. Flipped around, and cranked it up, and after some pumping she fired up. She also will now rev above 2k without stalling. A victory in my book.
With it running I checked the dwell, which was at 31*. Tried checking the timing will have to wait till dark cause I cant see the mark right now. It is idling high. My question is should I try and adjust the idle speed and mixture first, or the timing. I would guess the timing, just want to make sure. After that I'll take her to the water and tune the idle just right. Thanks for all the help, any other recommendations of things to do before I take her back out?
