SpinnerBait_Nut
Honorary Moderator Emeritus
- Joined
- Aug 25, 2002
- Messages
- 17,651
When laying rolled roofing down, do you use the black tar at each overlap?
Also, how big of an overlap do you create?
Also, how big of an overlap do you create?
That sounds alittle Extreme to me,.......I'm convinced I'm gonna slop and mop the whole top 1/2.
Ayuh,.......
Are you using 1/2 lap, or single coverage,..??..??
I put a layer of Single Coverage on the Riverhouse to band-aid it thru til the Big Lift is over, when it'll finally get a Steel Roof......
We slathered about a 6" strip along the lower edge of each sheet......
And the Overlap worked out to about the same 6" in most places,....
Some were slightly more,+ some slightly less....
That sounds alittle Extreme to me,.......