Sealing a deck hatch

bijou22

Petty Officer 1st Class
Joined
Jul 3, 2005
Messages
302
Wellcraft 21sl 1997.
My deck hatch has some small leaks in it and I will remove to investigate.
What is the procedure for re-sealing it against the boat?
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Sealing a deck hatch

there are many sealers out there, but i go back to the old butyl base caulking. new dries, and stays flexible. mineral spirits for clean up. i assume you are saying it's leaking around the frame, not between the frame and hatch.
 

Saskatoon2005

Master Chief Petty Officer
Joined
Apr 27, 2005
Messages
810
Re: Sealing a deck hatch

Is it an inspection hatch? Or a hatch that goes into storage? Is it for checking your hull?

Patrick
 

bijou22

Petty Officer 1st Class
Joined
Jul 3, 2005
Messages
302
Re: Sealing a deck hatch

I have attached a picture for you to see what I mean.

DSC01372.jpg
 

bijou22

Petty Officer 1st Class
Joined
Jul 3, 2005
Messages
302
Re: Sealing a deck hatch

A closer look at the deck hatch. What is the best way to seal it?

DSC01855.jpg
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Sealing a deck hatch

like i said, is it leaking between the frame and the deck, or the lid and the frame? it makes a difference. it looks like the existing sealer between the frame and deck, is shot. remove the screws and remove the hatch. clean both surfaces, and get a caulking gun and tube of butyl caulking, at home center. put a large bead on the caulking, on the deck, set the hatch in place and screw down, now clean up the mess, with paint thinner (mineral spirits).
 

bijou22

Petty Officer 1st Class
Joined
Jul 3, 2005
Messages
302
Re: Sealing a deck hatch

Just wondering, is the top half of the hatch removable without undoing the inside part?
Is it just a case of removing the 10 screws in the top?
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Sealing a deck hatch

looks like just remove the 10 screws. it should separate.
 
Top