Shift linkage problems 1987 Force 125

[Brandon13]

1987 Force 125. I've read numerous threads on shift linkage but I still am unsure what to do to solve my problem. Last time I had the boat out, I could not get it to shift into forward without reving it up significantly and messing around with it. The cables are fairly new and move easily when not connected. I have the cables connected correctly in the control box and it moves freely. When everything is connected, it is a pain to move the shifter into both forward and reverse. Where exactly can this be adjusted? thanks

 

[Frank Acampora]

Re: Shift linkage problems 1987 Force 125

are the cables too short? There should be at least a 2 foot loop in the splashwell otherwise cables may bind.

 

[foodfisher]

Re: Shift linkage problems 1987 Force 125

Did the problem start right after the new cables or did things work well after the new cables then stiffen up?

 

[Brandon13]

Re: Shift linkage problems 1987 Force 125

The cables are not too short. There is a significant loop in the splash well. The cables seemed to be fine when they were first installed. However, the boat sat for a few months and the problem occurred upon taking it out after the layoff.