size of vacume lines.....?????????????

gordwa

Seaman Apprentice
Joined
Jan 3, 2011
Messages
37
Does anyone know what the size is of all the tiny little hoses that come off the carbs ,and attach to the block check valves and also to the primer on a 1990 ...90 hp and where I can buy it in bulk.Thanks
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: size of vacume lines.....?????????????

Try your BRP dealer. He should have it in bulk.
 
Last edited:

Will Bark

Lieutenant
Joined
Aug 1, 2010
Messages
1,470
Re: size of vacume lines.....?????????????

If you don't have a BRP dealer close by then a NAPA store should have it.
 

gordwa

Seaman Apprentice
Joined
Jan 3, 2011
Messages
37
Re: size of vacume lines.....?????????????

I will try that...Thankssssss
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: size of vacume lines.....?????????????

If you go to NAPA make sure they're alcohol resistant.
 

oldboat1

Fleet Admiral
Joined
Apr 3, 2002
Messages
9,612
Re: size of vacume lines.....?????????????

They MAY be the size of the small clear gas lines used in some chainsaws, weedwhackers, and other small engines. Check the above sources, and also hardware stores (local ACE hardware carries a lot of that stuff).
 

emdsapmgr

Supreme Mariner
Joined
Dec 9, 2005
Messages
11,551
Re: size of vacume lines.....?????????????

The recirculation hoses on that engine are 1/16", ethanol resistant, sold by Bombardier dealers by the foot under part number 772568.
 
Top