Theeplaymaker
Seaman Apprentice
- Joined
- May 30, 2012
- Messages
- 41
Looking for some advice on how my plugs on my 48 spl look. These have been out on 3 trips this year all about the same 5 min hard run to my fishing spot with a little idling to get to the spot once there then a hard 5-8 min run back to the dock and minimal idling to get to the dock in the no wake zone. This motor runs great and fires right up just wasn't 100% sure why the top plug was moist and the bottom one was dry. These are the NGK's suggested on the max rules page gapped at .030. Thanks
Attachments
Last edited: