Sport Jet Satator Seal

[rshervill]

I was changing the fluid in the stator on my 97 175 SportJet and there was some water in the fluid. Upon closer inspection I noticed there was a small tear in the seal that goes around the shaft. My question: Can you buy just the rear seal, and if so how do you change it? I looked and looked but cant figure out how to do it.<br />Thanks!

 

[jetdriven]

Re: Sport Jet Satator Seal

You can find just about every part and a manual for your boat at www.stemtostern.com. Their website shows exploded views of all the mercury sportjet drives. Good luck.

 

[rshervill]

Re: Sport Jet Satator Seal

I can't seem to get the link to work, but I've seen the 'fiche on the computer, and cant see how the seal comes out there either!

 

[BassMan283]

Re: Sport Jet Satator Seal

Remove the period after com.

 

[jetdriven]

Re: Sport Jet Satator Seal

Take the period "." off of the end of the link, then it should work. www.stemtostern.com

 

[rshervill]

Re: Sport Jet Satator Seal

OK! Thanks for the help. New Question: When I took the fill/vent screw out to drain the stator, there was ALOT of pressure behind it. (Got a blue oil shower!) My question is why? I filled it myself and there was no pressure, why/how does the presssure build in there? I will place this question on the board as well, all help is appreciated!