Re: starcraft project (60s or 70s) 16'
well keep forgetting to take picture even when i remember my camera. iv been making some progress i descited to just use tremclad and a roller to paint the boat, the hull is finished (white) and i will paint the top and inside withing the next couple days while i had the boat off the trailer it needed some work took me 3 days and finished today i converted from rollers to bunksre wired with new lights and painted after going over it with a flap disc and wire wheel also got a new winch strap not a fan of frayed rope, lol im happy with the out come i think the trailer was original had coil sprins and panhard bar rollers where completley shot and had groves in them from the boat sitting so long i made adjustable brackets for the bunks. also today i took some 800 grit and sanded down the windsheild frame and then polished with autosol came out prety good didnt want to put to much into it it was just spur of the moment idea, i might figure out the best way to polish the plexi windsheild but its not that bad. tomorrow the boat goes back on the trailer to finish up the paint then the floor and carpet will go in as soon as the paints dry, its ready to go
well keep forgetting to take picture even when i remember my camera. iv been making some progress i descited to just use tremclad and a roller to paint the boat, the hull is finished (white) and i will paint the top and inside withing the next couple days while i had the boat off the trailer it needed some work took me 3 days and finished today i converted from rollers to bunksre wired with new lights and painted after going over it with a flap disc and wire wheel also got a new winch strap not a fan of frayed rope, lol im happy with the out come i think the trailer was original had coil sprins and panhard bar rollers where completley shot and had groves in them from the boat sitting so long i made adjustable brackets for the bunks. also today i took some 800 grit and sanded down the windsheild frame and then polished with autosol came out prety good didnt want to put to much into it it was just spur of the moment idea, i might figure out the best way to polish the plexi windsheild but its not that bad. tomorrow the boat goes back on the trailer to finish up the paint then the floor and carpet will go in as soon as the paints dry, its ready to go