FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I had replace a old 115 merc with a 60HP BP merc. but I noticed that the steering wheel is off by about 90 degrees. Is there an adjustment for this? or do I just pull he wheel off and re-position it? Its on a pontoon.
I may be wrong here, but wouldn't it work to un-clip the steering cable and run it all the way out, reposition the wheel, then run the cable back in? It would take two people, with one person paying attention to when the cable is free? Just my guess.
That don't sound right, that means that its a hit and miss to install a steering wheel. Its ok if you can see the motor, Guess I could paint a red mark at the 'top' of the wheel.
Chris, If you have rack and pinon steering, you may be able to set the motor dead straight, disconect the rack, turn the wheel to be straight and then reattach the rack. Also, the length of the steering link from the cable to the motor may be adjustable. if the motor steers more one side than the other, this adjustment may be the correct one to make to compensate.
Well, I was able to adjust the steering arm on the motor so now the wheel is upside down. I turned the center hub on the wheel so the name is right side up. Just have to learn to drive with the wheel upside down (that was better then at some odd angle.) you would think there would be adjustments on these things. ( I also was unable to get the wheel off after I removed the nut, I tired pulling, but did not want to break anything, thinking perhaps I can re-position the wheel 180 degrees). Anyone know how to get the wheel off?
