JDs Dorsett
Seaman
- Joined
- Oct 12, 2009
- Messages
- 63
Hello,I am new to this posting thing but thought I would give it a try. I am not a mechanic and only have basic Ideas of what to try. so here it is, I bought this 17 ft. Dorsett with a 70s Evinrude outboard recently from a guy that told me he had the same problem and was unable to figure out, {he is not a mechanic either}the engine runs fine, and it moves the boat fine under normal harbor speed, {5 mph} yet when you try and give it more gas to get the boat moving faster, it does not push the boat, even with full throttle. it just stays at a slow speed, and even seems as if it will die. The real strange part,......at the dock the engine starts, Idles, and goes into gear fine. but when it is tied to the dock and you put it in gear and give it gas from the motor manually, it acts like it will rip off the cleats from the dock, so it has thrust and power, and when you look at the mechanical action of the shifter for throttle it appears to be functioning as it should. I am at a loss for figuring this out. the only other thing I can think to do is take the throttle cable out and see if it has a break in it, but it seems to be pushing the throttle fine. any Idea would much be appreciated, thank you in advance. John