FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I had the same issue with my DT25...I cleaned the carb once again using carb cleaner and compressed air. Also took the plugs out and my gap was set to low...yours should be set at .028. That got rid of my engine stalling...I am having some other issues with not getting full power but those are some things for you to check
Failed in test tank after about 3 minutes. Noticed with prop off in forward /reverse runs ok, just cannot take the torque of the prop. back to the drawing board.
soak carb in carb cleaner overnight, blow out with compressed air, jets everything ... set air/fuel mix to 1 & 1/2 turns outwards from soft stop .... make sure you have enough ventilation at the tank ...
soak carb in carb cleaner overnight, blow out with compressed air, jets everything ... set air/fuel mix to 1 & 1/2 turns outwards from soft stop .... make sure you have enough ventilation at the tank ...
Still stalling after ten minutes operation. Noticed that p hole sometimes stops working. I have replaced the impellor. Replaced carburettor. Any other ideas?
