Thanks for the help.

[jtegidgo]

Re: Thanks for the help.

New to the forum, but this place is alot more helpful than the manuals available. All the moderators seem to be very knowledable and helpful. Thanks

 

[fishnfiend]

Re: Thanks for the help.

Have an '88 Evinrude 40 Hp. Sat for over 4 years.<br /><br />Thanks to this forum:<br /><br />Carbs cleaned and rebuilt.<br />Went VRO-less (three wire to conventional).<br />Powerpack and new coils installed.<br />Water pump installed.<br />Compression tests at 145 both cylinders.<br />Changed prop pitch.<br /><br />the motor runs like a scalded cat!!<br /><br />Thank you gentlemen. You cannot find the valuable real-life information found in this forum anywhere else. Shoot, it would have been a 3 1/2 week wait and several hundred dollars at the local marine wrench shop. Instead, I learned the motor, and will be able to fix whatever else goes wrong. Thanks, Iboats, for hosting this forum.

 

[woodshole]

Re: Thanks for the help.

With the help of you all I have repaired a fire damaged outboard. The experts here are top notch. The advice they offer is keen. It is very unique to have such access to such sharp minds.

 

[peeterb]

Re: Thanks for the help.

I also would also like to say thanks to many of the posts that I have read to help me better under stand my boat so that me and my family can and have enjoyed two years of trouble free boating.I would also like to thank Dhadley,JB and OBJ for taking the time two help me on a couple of isues I had.Thanks everyone<br /><br />Glassc

 

[timmathis]

Re: Thanks for the help.

Thanks,To all. Iboats fourm's can cover anything from a Tonka truck to a Army tank. (Not just boats.)I also take my hat off to the modarators, That keep us all in line. So everybody KEEP UP THE GOOD WORK!!! <br />Tim Mathis<br /><br />P.S. And GOD BLESS YOU ALL!

 

[whitejamie99]

Re: Thanks for the help.

Thanks Walker for taking the time off Saturday to work on my link and sync issues. You went above and beyond what anyone could expect and I greatly appreciate it. I learned a lot from you and will do my best to "pay it forward".<br /><br />Thanks also to this forum and all the other people who have helped me. Now its time to do some serious boating and fishing!!!<br /><br />Jamie White

 

[sprouticus]

Re: Thanks for the help.

Iboats has saved me TONS of money and/or TONS of time trying to fix my outboards moyself. A special thanx goes to DHADLEY , OBJ, CATransplant, and J.B., for not only helping me directly, but for helping others that experienced similar problems as me and I was able to read their threads and fix my motor. The only reason I still have the internet is because of iboats, I don't use my computer for much else anymore. <br /><br />THANX GUYS!!!!

 

[jspitzer]

Re: Thanks for the help.

I'm kind of new here but have found a lot uf useful material on this site. Hats off to all of you who help with all the little problems that everyone has. This has become one of my favorite sites to visit because of all the knowledge all of you share.Thanks to not just one but all of you that have helped....

 

[duke3]

Re: Thanks for the help.

Thanks a lot, to all the people looking on this home page. We dont have that kind of home page here in small Denmark. So once again, thanks a lot.

 

[Aquasport19.6]

Re: Thanks for the help.

TO all of those who have helped me so far. I want to thank all of you i am in the middle of finding out what the problem is with my 115 Rude, and all of you have been so very helpful. Thank you again

 

[andiemarie]

Re: Thanks for the help.

Just wanted to add a big thanks to Paul Moir who has given me great feedback and helped us feel like we could actually accomplish some repairs on our motors! If it wasn't for his advice, I am sure we would have given up - now we actually know quite a bit about our motors. Well, at least enough to know when we need to ask....Thanks Paul!! AndieMarie

 

[ritchie12]

Re: Thanks for the help.

Many thanks to all for the generous help found in this forum!!!