the oil to fuel ratio for Envirude 25 HP E25REIE

fabienjossic

Cadet
Thread starter
Joined
Mar 10, 2021
Messages
12
Hello Everyone,

I just bought an old motor, and the guy couldn't tell me what was the ratio oil/fuel for his motor.

Would you help me or just tell me to what door i should knock?

thank you very much.

fabien jossic
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
39,984
50 parts gasoline for 1 part oil.-----Seller likely is flipping the motor if he does not know ratio.----Or if he has been running it then did he do damage ?
 

fabienjossic

Cadet
Thread starter
Joined
Mar 10, 2021
Messages
12
he told me that he was going to the gaz station, they were doing it for him. So he didn't know.
I hope it isn't damage... i haven't see it running, thanks for your help.
Where did you find this information please?
 

racerone

Honorary Supreme Mariner
Joined
Dec 28, 2013
Messages
39,984
I think most boating people know that these motors run at 50:1.-----And that has been so since about 1964 model years.-----Not secret information.
 

Sea Rider

Supreme Mariner
Joined
Sep 20, 2008
Messages
12,345
Check cylinder compresion with a dial compression tester to be sure cylinders are in good shape. The 50:1 ratio It's 80 Ml of oil per 3.80 Ltr gallon.

Happy Boating
​
 

fabienjossic

Cadet
Thread starter
Joined
Mar 10, 2021
Messages
12
Thank you very much guys for your answers, now i am confindent with the 50:1 ratio.
Sea rider, i am not an expert enough to do the test with the dial compression tester. but thanks for the advice.

have a nice day guys.
 

jhande

Chief Petty Officer
Joined
Jun 26, 2010
Messages
442
i am not an expert enough to do the test with the dial compression tester.
Doing a compression test isn't any harder than replacing the spark plugs.

Get yourself a compression tester:

Remove all spark plugs. Screw the testers adapter into the spark plug hole. Crank the motor over about 4 times. The gauge will stop rising at a certain point by itself no matter how much you crank it over.
Write that number down. Repeat for all the cylinders. Compare the numbers or post the results here. ;)
 

fabienjossic

Cadet
Thread starter
Joined
Mar 10, 2021
Messages
12
Hello!
thank you, i didn't it was that easy, I'll try my motor this spring, if it doesn't work i'll buy this cheap device to test it to test my motor.

I didn't know it would be that easy to test.

Thanks for the advice Jhande, have a nice evening.
 
Top