The R?surrection of the SeaGem

betayv

Senior Chief Petty Officer
Joined
May 13, 2008
Messages
706
Re: The R?surrection of the SeaGem

hey good to hear you almost done, the outdrive probably be there on friday, just read all the intructions on the new outdrive, the new outdrive is very noisy for the first 10-15 hours, good luck....
 

HVAC Cruiser

Lieutenant
Joined
Sep 12, 2009
Messages
1,254
Re: The R?surrection of the SeaGem

Hi HA,

I can't believe I did this, but I also can't believe its only 3' deep there in that section of the channel. I should have launched from the 2nd set of ramps. Its hard to tell from the chart but it looks 6' . Guess I should have trimmed the heck out of it Oh well, its been years since I have been on the water Guess I'm a rookie again

Here is the chart , the red arrow I drew indicates my trouble
SmithtownBay-1.jpg


Hey Beta,
I have heard about the noise I also heard that their paint stinks
When I talked to them they said 4 days to NY Depending how you count it it will be Friday or Monday the latest. I am really hoping friday so I can take her out again on Saturday or Sunday.
 

Huron Angler

Admiral
Joined
Apr 7, 2009
Messages
6,025
Re: The R?surrection of the SeaGem

That's a tricky channel to navigate from the look of things...that 3ft spot probably keeps the local marinas busy installing new drives and props.

I can't believe it's that shallow heading out into the sound either, we deal with the same stuff on Lake Huron depending on where we go.

BTW I almost took a job across the way from you in Darien, CT a few years back...I decided that the housing prices were a bit steep in that area:rolleyes::D

Good luck with the shipping, the sooner the better!
 

vegasphotoman

Lieutenant
Joined
Jul 13, 2009
Messages
1,411
Re: The R?surrection of the SeaGem

wow you aint kidding that might not be the best ramp to go out of until you get your sea legs!

geez.....shalllow as heck....looks like trim up alot and putt putt out of there....wait till you get out of the channel and past the 3rd bouys before lowering the drive and kicking it in the rear.......:p

Bill AWSOME..congrats on the new drive order!
and put that aluminum prop on it for the 1rst trip out
 

vegasphotoman

Lieutenant
Joined
Jul 13, 2009
Messages
1,411

HVAC Cruiser

Lieutenant
Joined
Sep 12, 2009
Messages
1,254
Re: The R?surrection of the SeaGem

Bill go out of Asharoken ramp instead about 10 miles from your house thereabouts .:D..WAY WAY beter...that ramp you went out of was a death harbor! shifting sands...shallow for 1/2 mile...uuuhg.....:eek:


I wish I could, its a different town, I live in the town of Smithtown I would have to pay a per launch and parking fee :eek:

If you look at my death harbor it has 2 boat ramps, the 1st one as soon as you come through the gates is the one I used and has those real low areas. The 2nd one up the road from there states its 6' on the map and has the actual Marina and docked boats I am going to use that one next time BUT I am definitely gonna trim the drive up and put my trim tabs down to keep the stern up as high as possible
 

BobsGlasstream

Commander
Joined
Sep 11, 2009
Messages
2,128
Re: The R?surrection of the SeaGem

Hey Bill,
Glad to hear you won't be off the water that long. After you get the new drive you may want to get the old one rebuilt to keep for a spare.
My drives are 1.98 and 1.84. Not much help for you.
Keep us posted.
The pics and Video looked great.
Take care my friend
Bob
 

HVAC Cruiser

Lieutenant
Joined
Sep 12, 2009
Messages
1,254
Re: The R?surrection of the SeaGem

Hey Bill,
Glad to hear you won't be off the water that long. After you get the new drive you may want to get the old one rebuilt to keep for a spare.
My drives are 1.98 and 1.84. Not much help for you.
Keep us posted.
The pics and Video looked great.
Take care my friend
Bob



Hi Bob,
The drive I had on her is a 1.65, the new one is a 1.47 . Funny story with the 1.65 the engine didn't have to work at all the engine rpm responded in the blink of an eye

I just ran the prop calc with the 1.65 and 15% slip the boat should run 61mph. WELL, if it can still handle the 25p prop with a 15% slip which is more than I think it will have. Typical slip is 7-12, with this setup the boat at 5000 will be doing 69mph :eek:
I don't think I will ever do WOT with her, well maybe just once to check :D

Well here is an update from UPS :D

Status: In Transit - On Time
Scheduled Delivery Date: 08/06/2010
WooHoo Maybe I can get her on the water for Sunday!!!! I have a family BBQ to go to on Saturday :( If it gets here early enough Friday, I might be able to get her installed and have her ready for the next maiden voyage :rolleyes::D.
 

HVAC Cruiser

Lieutenant
Joined
Sep 12, 2009
Messages
1,254
Re: The R?surrection of the SeaGem

wouldn't you know it if I didn't have bad luck, I'd have no luck at all :(
I just got a shipment exception from UPS, here it is

UNIONDALE, NY, US 08/05/2010 4:45 P.M. TRAIN DERAILMENT
JACKSONVILLE, FL, US 08/04/2010 9:09 A.M. DEPARTURE SCAN
08/04/2010 6:32 A.M. ARRIVAL SCAN
TAMPA, FL, US 08/03/2010 10:00 P.M. DEPARTURE SCAN
08/03/2010 6:22 P.M. ORIGIN SCAN
US 08/03/2010 4:45 P.M. BILLING INFORMATION RECEIVED

Unreal, A TRAIN Derailment!!!!!! now how often does that happen ?????

They don't even have a delivery date on the sheet :mad: I wanted to install it tomorrow :redface::(

The mood I am in, I will drive to Uniondale NY(wherever that is) to get it myself!

EDIT- Turns out Uniondale is 30 mi from my home :(
 

tallcanadian

Captain
Joined
Sep 7, 2006
Messages
3,250
Re: The R?surrection of the SeaGem

I'm sorry for your misfortune, HVAC. But on the upside, boat looks great on the water. Hopefully things will run smooth for ya now. I'll have a beer for you this weekend. ;)
 

BobsGlasstream

Commander
Joined
Sep 11, 2009
Messages
2,128
Re: The R?surrection of the SeaGem

Hey Bill,
Tough luck on the drive.
Today must have been the day for trouble. We had ROTO CAST tools coming in from a supplier today and the truck crashed and burnt. Our tools didn't survive the fire. They were nickle shells.
Not as important as your drive but we needed them at work. :D:p:D
I hope you still get the drive, in time for the week end.
Take care
Bob
 

HopeSheFloats

Lieutenant Commander
Joined
Jun 12, 2009
Messages
1,674
Re: The R?surrection of the SeaGem

wouldn't you know it if I didn't have bad luck, I'd have no luck at all :(

I hear it's hereditary, so we must be related :eek: seriously though, mine seems to have turned the corner and things are looking up...sure they will with you as well...glad to see the progress you have made, don't know why/how I missed a bunch lately...keep a stiff upper lip..if nothing else that will keep the liquor from running back out ;) ,
 

CheapboatKev

Vice Admiral
Joined
Oct 4, 2008
Messages
5,813
Re: The R?surrection of the SeaGem

wtf!!!!
That aint no party train!

Lets see..30 miles @ 90 MPH...its a 15 min drive to Uniondale!..

Aint that were Archie & Veronica are @?
 

sprintst

Commander
Joined
Apr 18, 2009
Messages
2,066
Re: The R?surrection of the SeaGem

Maybe Jughead or Moose was driving the train :)

wtf!!!!
That aint no party train!

Lets see..30 miles @ 90 MPH...its a 15 min drive to Uniondale!..

Aint that were Archie & Veronica are @?
 

HVAC Cruiser

Lieutenant
Joined
Sep 12, 2009
Messages
1,254
Re: The R?surrection of the SeaGem

Maybe Jughead or Moose was driving the train :)

Probably Jughead :eek:

Just checked again and the status hasn't changed. The Only thing I have going is I know lots of time if the packages get to the hub by 5am it might still make the truck.
If there is no progress tomorrow am or if it shows it just at the terminal I am going to call them and see if I can pick it up at their terminal.
 

betayv

Senior Chief Petty Officer
Joined
May 13, 2008
Messages
706
Re: The R?surrection of the SeaGem

hey be sure you saved you invoice and the little warranty card,write down the serial number from the outdrive, follow break in procedures, today Im shipping my outdrive back to SEI the uppers gears are making a very bad noise they told me they going to fix it and send it back...
 

HVAC Cruiser

Lieutenant
Joined
Sep 12, 2009
Messages
1,254
Re: The R?surrection of the SeaGem

hey be sure you saved you invoice and the little warranty card,write down the serial number from the outdrive, follow break in procedures, today Im shipping my outdrive back to SEI the uppers gears are making a very bad noise they told me they going to fix it and send it back...

OUCH!!!!
That puts a damper on your boating season :(
I paid for it on credit card and they e-mailed me the invoice. I will print it up and along with anything else that comes with it, packing slip their printed invoice etc. I will put it all in my safe

Well I still haven't gotten the drive in and the status still shows TRAIN DERAILMENT :mad: I called UPS before and they were no help. I went out today and bought the oil & mounting gasket set. I even broke down and bought Humminbird fish finder with a depth alarm :D to make sure I don't do this again LOL

This is all of course contingent on actually getting my new drive so I can take her back out lol

EDIT- So now I can honestly say I am livid!!!!!! It has been 25hrs since the train derailment and still no update! Making matters worse where I was supposed to be working on sunday, the kids got chickenpox shots and now are all sick. I have never had the chickenpox and there was no shot then I was a kid. Needless to say I can't go near there and now I can't even take the kids out on the boat cause it doesn't have a out drive :mad:
 

redfury

Commander
Joined
Jul 16, 2006
Messages
2,657
Re: The R?surrection of the SeaGem

they say bad things happen in 3's...what number are you on again? :rolleyes:
 

proshadetree

Lieutenant Commander
Joined
Jul 19, 2008
Messages
1,887
Re: The R?surrection of the SeaGem

Dang dude life happens. I hope your drive reaches you in perfect shape and that will be the end of the drive train saga. Also hope your kids feel better soon.
 

HVAC Cruiser

Lieutenant
Joined
Sep 12, 2009
Messages
1,254
Re: The R?surrection of the SeaGem

they say bad things happen in 3's...what number are you on again? :rolleyes:

Hey Red- Well I found what the 3rd thing is, My laptop crashed :mad: I was up till 3:30am trying to retrieve all my files and get them onto my server.

Dang dude life happens. I hope your drive reaches you in perfect shape and that will be the end of the drive train saga. Also hope your kids feel better soon.

Thanks PSH With the HD crash although I was able to rescue my e-mail files I haven't installed outlook yet ( I had lent my brother my MS Office disk) so I don't even know if the tracking # status has changed

The sick kids aren't mine they are at my customers house thats why I can't go near there.
 
Top