I replaced the pump a couple years ago on my T/T, and all was well. However, lately my motor will tilt down easily until it hits those 2 piston rods jutting out at the base of the T/T. Then is labors hard to compress those to get down all the way. If I don't take it in 2 secong stages, the relay will burn - it's that hard. If I take it slowly in 2 second bursts, it will go down all the way.
What's the deal with this - what's the problem & what's the fix? It's like they are full of fluid & won't drain to let the motor down.
What use are these anyway - the big center piston does all the work.
1985 Mercury 150 hp XR2 Black Max V-6
What's the deal with this - what's the problem & what's the fix? It's like they are full of fluid & won't drain to let the motor down.
What use are these anyway - the big center piston does all the work.
1985 Mercury 150 hp XR2 Black Max V-6
