- Joined
- Oct 25, 2011
- Messages
- 25,164
Re: Transom repair
I'd use a dead blow hammer (softer head if you miss) and a block of 2X4
Hold the 2X4 under the channel on either (might try both) side (in or out) and tap up w/ the hammer. It shouldn't take much force to tap it free.......
I'd use a dead blow hammer (softer head if you miss) and a block of 2X4
Hold the 2X4 under the channel on either (might try both) side (in or out) and tap up w/ the hammer. It shouldn't take much force to tap it free.......