FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I've had trihulls as narrow as 60" and as wide as 94" but most seem to be in the 70 to 80" range from back then. Most fit between the fenders of the larger width roller trailers, but not all. Back then it seemed that most boats sat high and above the fenders, making trihulls sit much higher. An old bass boat trailer or any wide axle trailer might be the best ticket.
You want the boat as evenly supported and as low as possible on a particular trailer if you have rollers that aren't touching the hull, adjust them to contact the hull. Their not doing any good if their standing out in mid air.
as long as the clearance is there around the fenders, you may be able to put the trailer on jack stands, remove the axle from under the springs, and reinstall above the springs. this will lower the trailer by a few inches
